Cavities cannot be modified when the wall thickness is set to 0.
Some cavities were outside the wall thickness and have been clipped or removed to fit.
Storage for more vertices is unavailable.
Overlapping or intersecting polygons should be removed!
Enter 'Normal Scale' to Edit Text!
No objects selected!
Too many objects selected!
The selection is locked.
Two or more unlocked objects must be selected.
Out Of Memory!
Please close files in other subsections before quitting.
Illegal object(s) selected.
Fillet radius is too large.
A rectangular bounding box must be selected!
This pattern is not editable.
Fillet radius is too small.
Specified fillet radius will not fit on the lines.
Application will not run using
old Macintosh 64K ROM!
Application requires System 6.0.5 or later to run!
Printer driver or printer resource file missing or corrupted. Prt Mgr error ^0.
Error occurred during printing.
Printing Manager error ^0.
Resource Manager error!
QuickDraw error!
There is not enough space on the disk to save the file.
The disk volume or file is locked.
Please unlock it and try again.
This application is an invalid copy.
Tablet driver not found.
3D Polygon must be selected.
This name is already in use. Reverting to old name.
A worksheet is not active.
Attempt to create cyclical symbol! Object will be inserted as group instead of symbol.
Must select one text item and one symbol instance only.
Cannot link text to a rotated symbol.
Name already in use!
All layers must have different names!
Cannot open EPS files directly—a new document will be opened. To place the EPS file in it, use the Import EPS command.
Unknown file type! An untitled document will be opened.
This file is damaged! It will open with as much data as possible.
Illegal objects detected in drawing! Some objects have been removed.
DXF file is too large to fit into current units setting.
Ran out of memory while trying to draw rotated text.
The combination of units and scale chosen would produce an illegal drawing environment. Please reduce accuracy or scale.
Some RenderMan‚Ñ¢ resources could not be located in the system folder.
The text size is too small for creation or editing. Please zoom in.
The file is being converted and a new file will be opened with a new name.
One or more operations was aborted due to lack of memory.
Increase partition size!
There is already another copy of MiniCad+ running on this network with the same serial number.
There is no symbol currently selected.
The 3D tools are not available while the active layer is in plan projection. Would you like to switch this layer to orthogonal projection?
There is no object selected to use as the center of rotation. Either change the center of rotation selection in the mode bar or select an object.
This tool works only in perspective projection. Would you like to change projection to perspective?
You do not have another layer with which to create a Layer Link.
The mirror tool works on selected objects only. None are currently selected.
Hybrid objects can only be rotated about the perpendicular to the ground plane. Would you like the working plane set to the ground plane?
Hybrid objects can only be mirrored such that they remain perpendicular to the ground plane. Would you like the working plane set to the ground plane?
Hybrid objects can only be mirrored such that they remain perpendicular to the ground plane. Set the working plane so that it intersects the ground plane at 90°.
A symbol of that name could not be found in the specified directory.
One or more of the values in this dialog is not valid. Please change that value to a legal number.
The Align Plane tool does not work with walls or roofs. They must remain oriented relative to the ground plane.
2D symbols cannot be placed by the 3D symbol insertion tool.
The current symbol is hybrid. Would you like the working plane set to the ground plane?
Pitch angles can be no larger than 85°. The angle has been cropped to 85°.
That ratio of rise/run specifies a pitch angle which is greater than the 85° limit. The rise distance has been adjusted describe a pitch angle of 85°.
With the given height and position, the pitch angle of the roof will be greater than the 85° limit. A height has been selected that crops the pitch angle to 85°.
This operation only works on hybrid objects in plan projection.
Only one 3D object can be reshaped at a time.
2D and hybrid symbols must be created in Plan Projection.
3D symbol centers must be specified with the 3D cursor. Change to the 3D tool palette.
The ruler origin cannot be set unless the active layer is in plan view.
Would you like the working plane flipped to a usable orientation?
This file is in an old format not read by this version of the program. Please contact Graphsoft about converting it.
This file was created with a newer version of this program and cannot be read by this version.
No 3D objects selected!
Click on one wall and drag to another wall to join.
This is not a valid EPS file.
Cannot place this file because it does not contain a valid %%BoundingBox comment.
Hybrid Symbols can only be inserted in plan projection with this tool.
A disk related error has occured.
Hybrid objects can only be rotated about the Z axis.
The Join & Fillet command does not work with two lines. Try using the Fillet tool instead.
Cannot enter nested symbols from the drawing. Use the Select Symbol dialog.
Are you sure you want to convert the selected objects to 2D Polygons?
Are you sure you want to convert the selected objects to 2D Lines?
The custom offset is an illegal value. Go to this tool’s preference to reset the value.
No overlay
All tools and menus items have been disabled for this demo version. Please contact Graphsoft at (410) 290-5114 for a completely functional demo copy.
There is no overlays folder in the same directory as your application!
